How To Put 3 X Component Cars
Most modern vehicles have regular seats in the doors. A 16.5 cm acoustic can be placed in the front doors of almost all modern machines. Even if you've got 13 cm, you can and should have 16.5 cm acoustic. This will give a good frontal strike, which is very important for a sound system as a whole.
Frontal acoustics, if possible, should be a component, i.e., with a dried food, a coaxial, with a built-in. This allows the right sound scene to be shaped in front of the listener. In high-grade systems, frontal acoustics may be the 3rd component, and in Hi-End class systems with scan-connection, without the use of cross-sizers, with the sound split through the processor.
| 2nd Component Acoustic System | Coaxy acoustic system |
The 2nd component acoustic in the kit always has a crossover. The crossover is a passive filter that serves to separate the frequency into the acoustic system components. The high-class coaxy acoustic is also filled with crossovers.
There's a 3rd pattern of cashiers:
- 1 - 6 dB/Oct - represents a condenser in a small box or wrapped in thermosuage.
- 2 - 12 dB/Oct. - a box with several condensers and coil.
- 3 - 18 dB/Oct is a serious product with a few dozen radios and clams.
| Crossover 1st order | Crossover of Order 2 | Crossover 3rd order |
Picking Acoustic under the automagnitolu Dynamics are the most important condition. The power is not particularly relevant, since the most powerful magnetol will produce not more than 19-20 W, and the rated output below 20 W is no longer available. 85-89 dB is considered low, 9092 dB medium, 93-95 dB high. Acoustics with higher sensitivity exist, but it is unlikely that long will live under harsh conditions in the vehicle (i.e. 30, +30 and high humidity).
When selecting an acoustic under the force, it is only worth drawing attention to the rated (fair) power. All the maximum and peak power is the numbers from the ballda.